Product Center
One of sensor manufacturers with the largest variety of discrete sensors, the most complete specifications and the best performance in China
产品中心
PRODUCT CENTER
产品中心
PRODUCT CENTER
产品中心
PRODUCT CENTER
FN12-E2 series
Product Series： Hall series
| NPN | NO | FN12DNO-E2 |
| NPN | NC | FN12DNC-E2 |
| PNP | NO | FN12DPO-E2 |
| PNP | NC | FN12DPC-E2 |
Feature description The detection distance is determined by the magnetic strength of the target Long life and high reliability Yellow LED display can check the status of the sensor Economical and simple operation Protection class IP67 (IEC)
Technical parameters
Download
3D model
Certificate
Dimensional drawing (unit: mm)
Connection line
Download
Documentation
Model
Certificate
Annex
| Detection distance | 12mm |
| Installation type | Flush |
| Supply voltage | 10...30 VDC |
| Switch point offset | ≤+10% |
| Hysteresis range | 3...20% |
| Repetitive error | ≤3% |
| Load current | ≤200mA |
| Residual voltage | ≤2.5VDC |
| Circuit protection | Surge protection,short circuit protection,overload protection,reverse polarity protection |
| Indicator | Yellow LED |
| Consumption current | ≤15mA |
| Ambient temperature | -25...70℃C |
| Environment humidity | 35...95RH% |
| Switching frequency | 200Hz |
| Withstand voltage | 1000/AC 50/60Hz 60s |
| Insulation resistance | ≥50MΩ（500VDC） |
| Vibration resistant | Complex amplitude 1.5mm 10...50Hz(2 hours each in X, Y, and Z directions) |
| Protection degree | IP67 |
| Dimension | M12*1*40 |
| Housing material | Nickel copper alloy |
| Connection type | M12 connector |
