Service Support
Efficient and innovative, industry-leading, dedicated service, striving to be global top brand
支持与服务
SERVICE SUPPORT
Common Problem Types
What are the characteristics of photoelectric sensor?
Non-contact detection, long service life, no damage to the detected object. It is suitable for long distance detection and has a wide range of uses. Applicable to a large variety of detected objects, objects that have an effect on the propagation of light can be used. High response frequency, suitable for high-speed pipeline detection. High detection accuracy, it can be used for different color resolution.
What kinds of light sources do photoelectric sensors generally have?
The emitter of the photoelectric sensor usually uses the following light sources: red LED - visible light, which can be easily adjusted. Infrared LED - high energy invisible light. Red laser - visible light, whose physical properties are ideal for small object detection and large detection ranges. Lanbao photoelectric series sensors mainly use infrared LED as a light source.
The basic principle of inductive sensor?
Inductive sensors are based on the principle of mutual inductance between metal conductors and alternating electromagnetic fields. The detection coil at the front of the sensor generates a high-frequency magnetic field, and when the metal object approaches the magnetic field, the eddy current is generated inside the metal object, resulting in the attenuation of the magnetic field energy. When the metal object is constantly close to the sensor induction surface, the energy is absorbed and the attenuation is caused. When the attenuation reaches a certain degree, the sensor switch output signal is triggered, so as to achieve the non-contact detection purpose.
What's the basic principle of capacitive sensors?
The sensing surface of the capacitive sensor is composed of two coaxial metal electrodes, which form a capacitor and are connected in series in the RC oscillation circuit. When the power supply is on, the RC oscillator does not oscillate, and when a target is near the sensor sensing surface, the capacitance increases and the oscillator begins to oscillate. Through the processing of the post-stage circuit, it is converted into a switching signal, so as to detect the existence of objects. Capacitive sensors can detect metal objects, can also detect non-metallic objects, the maximum operating distance can be obtained for metal objects, the operating distance for non-metallic objects depends on the dielectric constant of the material, the greater the dielectric constant of the material, the greater the operating distance can be obtained.
What's the basic concept of photoelectric sensor?
Photoelectric sensor is a general term for sensors that use light to detect objects. The transmitting part of the sensor emits the optical signal and is reflected, blocked and absorbed by the detected object, and then detected by the receiving part and converted into the corresponding electrical signal to realize the control device. Photoelectric sensors in general, there are three parts, they are divided into: emitter, receiver and detection circuit.
What is the margin of error for the proximity switch sensing distance?
The error between the sensor's sensing distance and the standard sensing distance is generally ±10%.
Close Video
- About Us
- Product Center
- Solution
- News
- Talent Development
- Service Support
online message