Single line of text

Product Center

One of sensor manufacturers with the largest variety of discrete sensors,
the most complete specifications and the best performance in China

产品中心

Product Series： PSE little square series

PSE-TM20 through beam sensor, Sn20m, Infrared, output NPN/PNP, NO/NC selectable, 2m PVC cable/M8 connector selectable

Technical parameters

Download

3D model

Certificate

Dimensional drawing (unit: mm)

Connection line

Documentation

Model

Certificate

Detection type	Through beam
Detection range	20m
Output type	NPN NO/NC or PNP NO/NC
Response time	≤1ms
Light source	Infrared（850nm）
Supply voltage	10...30 VDC
Consumption current	Emitter: ≤20mA; Receiver: ≤20mA
Load current	≤200mA
Adjustment method	Knob adjustment
Direction angle	>2°
Voltage drop	≤1V
Sensing target	≥Φ10mm opaque object (within Sn range)
Circuit protection	Short-circuit, overload, reverse polarity and zener protection
Distance adjustment	Press the button for 2...5s, when the yellow and green light flash synchronously at 4Hz, and lift to finish the distance setting. If the yellow and green light flash asynchronously @8Hz for 3s, setting fails and the product distance goes to the maximum.
Indicator	Green light: power, stable signal (unstable signal flash) Yellow light: output, overload or short circuit (flash)
NO/NC adjustment	Press the button for 5...8s, when the yellow and green light flash synchronously at 2Hz, and lift. Finish state switch.
Anti-ambient light	Anti-sunlight interference ≤ 10,000lux; Incandescent light interference ≤ 3,000lux
Operating temperature	-25 ..55 ºC
Storage temperature	-25...70 ºC
Protection degree	IP67
In conformity with standards	CE
Production standard	EN60947-5-2:2012、IEC60947-5-2:2012
Material	Housing: PC+ABS；Filter: PMMA
Weight	50g
Connection	2m PVC cable/M8 connector