Product Center
One of sensor manufacturers with the largest variety of discrete sensors, the most complete specifications and the best performance in China
产品中心
PRODUCT CENTER
产品中心
PRODUCT CENTER
产品中心
PRODUCT CENTER
PSE-BC10 series
Product Series: PSE little square series
| NPN | NO/NC | PSE-BC10DNB | PSE-BC10DNB-E3 |
| PNP | NO/NC | PSE-BC10DPB | PSE-BC10DPB-E3 |
PSE-BC10 Diffuse reflection (Wide-angle), Sn10cm, Infrared, output NPN/PNP, NO/NC selectable,2m PVC cable/M8 connector selectable
Technical parameters
Download
3D model
Certificate
Dimensional drawing (unit: mm)
Connection line
Download
Documentation
Model
Certificate
Annex
| Detection type | Diffuse reflection (Wide-angle) |
| Detection range | 10cm |
| Output type | NPN NO/NC or PNP NO/NC |
| Response time | ≤0.5ms |
| Consumption current | ≤25mA |
| Load current | ≤200mA |
| Hysteresis | 3...20% |
| Supply voltage | 10...30 VDC |
| Voltage drop | ≤1V |
| Light source | Infrared(860nm) |
| Circuit protection | Short circuit protection,Polarity protection,Overload protection,Zener protection |
| Indicator | Green light: power, stable signal (unstable signal flash) Yellow light: output, overload or short circuit (flash) |
| Anti-ambient light | Sunlight interference ≤10,000 lux;Incandescent light interference ≤3,000 lux |
| Distance adjustment | Press the button for 2...5s, when the yellow and green light flash synchronously at 4Hz, and lift to finish the distance setting. If the yellow and green light flash asynchronously @8Hz for 3s, setting fails and the product distance goes to the maximum. |
| NO/NC adjustment | Press the button for 5...8s, when the yellow and green light flash synchronously at 2Hz, and lift. Finish state switch. |
| Operating temperature | -25ºC ...55 ºC |
| Storage temperature | -25ºC …70 ºC |
| Protection degree | IP67 |
| In conformity with standards | CE |
| Production standard | EN60947-5-2:2012、IEC60947-5-2:2012 |
| Material | Housing: PC+ABS;Filter: PMMA |
| Weight | 10g |
| Connection | 2m PVC cable/M8 connector |
| *For wide-angle products, the distance setting range is 2....15cm and cannot be less than 2cm. |
Close Video
- About Us
- Product Center
- Solution
- News
- Talent Development
- Service Support
online message