Product Center
One of sensor manufacturers with the largest variety of discrete sensors, the most complete specifications and the best performance in China
产品中心
PRODUCT CENTER
产品中心
PRODUCT CENTER
产品中心
PRODUCT CENTER
UR18-CC50 series
Product Series： Reflective series
| NPN | NO/NC | UR18-CC50DNB-E2 |
| NPN | Hysteresis mode | UR18-CC50DNH-E2 |
| 0-5V | Analog output | UR18-CC50DU5-E2 |
| 0-10V | Analog output | UR18-CC50DU10-E2 |
| PNP | NO/NC | UR18-CC50DPB-E2 |
| PNP | Hysteresis mode | UR18-CC50DPH-E2 |
| 4-20mA | Analog output | UR18-CC50DI-E2 |
1 NPN or PNP switch output. Analog voltage output 0-5/10V or analog current output 4-20mA. Output can be changed through serial port upgrade.
Technical parameters
Download
3D model
Certificate
Dimensional drawing (unit: mm)
Connection line
Download
Documentation
Model
Certificate
Annex
| Sensing range | 40-500mm |
| Blind area | 0-40mm |
| Resolution ratio | 0.17mm |
| Repeat accuracy | ± 0.15% of full scale value |
| Absolute accuracy | ±1% (temperature drift compensation) |
| Response time | 50ms |
| Switch hysteresis | 2mm |
| Switching frequency | 20Hz |
| Power on delay | ＜500ms |
| Working voltage | 15...30VDC |
| No-load current | ≤25mA |
| Load resistance | U/1k Ohm |
| Protection circuit | Reverse connection,digital overvoltage protection |
| Output indication | Red LED: Always on, no target detected |
| Flashing, no target detected in teach-in state | |
| Yellow LED: Always on, detected target within A1-A2 range | |
| Flashing, target detected in teach-in state | |
| Input type | With teach-in function |
| Ambient temperature | -25℃…70℃（248-343K） |
| Storage temperature | -40℃…85℃（233-358K） |
| Output characteristics | Support serial port upgrade and change the output type |
| Material | Copper nickel plating, glass bead filled epoxy resin |
| Protection degree | IP67 |
| Connection | 4 pin M12 connector |
